Page 2
Headset 1) USB charging port 2) Charging indicator light 3) 3.5mm audio port 4) Power on/off switch 5) 2.0/7.1/mute switch: - Turn upward: virtual 7.1 surround sound - Turn downward: stereo sound - Middle: mute on/off 6) Volume/pairing switch: -Turn upward +: increase the volume -Turn downward -: reduce the volume -Middle: to press the middle to pair the headset and transmitter.
Page 3
3.Charging method Please use Micro USB-USB ( cable to connect the headset ( and the USB power source (DC 5V) for charging; when it is charging , the charging indicator light is on; it takes around 5 hours to complete charging; when it is fully charged, the red light is off.
Page 4
5. Operation: 1)Insert the transmitter into the USB port of the device,the operation indicator light is flashing; 2)Power on the headset, if the headset and transmitter were paired , they are connected automatically; If the headset and transmitter were never paired, the indicator lights of both headset and transmitter are flashing slowly.
Need help?
Do you have a question about the HW-S2 and is the answer not in the manual?
Questions and answers