Samsung AH68-01852B Instruction Manual page 37

ge 68
g for Service
ot function properly. If the problem you are experiencing is not listed below or
he unit, disconnect the power cord, and contact the nearest authorized dealer
Check/Remedy
•
Is the power cord plugged securely into the outlet?
•
Turn off the power and then turn it back on.
•
Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
•
CD-ROMs and DVD-ROMs cannot be played on this Home
Theater.
•
Make sure that the rating level is correct.
•
Are you using a deformed disc or a disc with scratches on
the surface?
•
Wipe the disc clean.
•
No sound is heard during fast playback, slow playback, and step
motion playback.
•
Are the speakers connected properly? Is the speaker setup
correctly customized?
•
Is the disc severely damaged?
•
When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
•
Make sure that the DVD disc is 5.1-CH compatible.
•
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
•
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
•
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
Symptom
• Disc is rotating but no
•
Is the TV power on?
picture is produced.
•
Are the video cables connected properly?
• Picture quality is poor and •
Is the disc dirty or damaged?
•
A poorly manufactured disc may not be playable.
picture is shaking.
•
Is the remote control being operated within its operation range of
angle and distance?
The remote control does not
•
Are the batteries exhausted?
work.
•
Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
Audio language and
•
Audio language and subtitles will not work for DVDs not containing
subtitles do not work.
them. And depending on the disc, they may work differently.
Menu screen does not appear even
•
Are you using a disc that does not contain menus?
when the menu function is selected.
•
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Aspect ratio cannot be
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
changed.
appropriate function.
• The main unit is not
•
Turn off the power and hold the
working.
(Example: The power
longer than 5 seconds.
goes out or strange noise is heard.)
Using the RESET function will erase all stored settings.
• The Home Theater is
Do not use this unless necessary.
not working normally.
•
While "NO DISC" message appears on the display of main unit, hold
The password for rating
the main unit's
appears on the display and all settings will return to the default values.
level has been forgotten.
•
Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
Is the antenna connected properly?
Can't receive radio
•
If the antenna's input signal is weak, install an external FM
broadcast.
antenna in an area with good reception.
Check/Remedy
button on the main unit for
button for longer than 5 seconds. "INITIALIZE"
72
GB