Table of Contents
Advertisement
Listening to Radio
Remote Control
1
Press the TUNER button to select the FM band.
2
Tune in to the desired station.
Automatic Tuning 1 : When the
Automatic Tuning 2 : Press and hold the
broadcasting stations.
Manual Tuning : Briefly press the
Main Unit
1
Press the FUNCTION button to select the FM band.
2
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( ) button to select <PRESET> and then press the
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold
the
Manual Tuning : Press the STOP ( ) to select <MANUAL> and then briefly press the
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select MONO for a clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1
Press the TUNER button to select the FM band.
2
Press the
3
Press the TUNER MEMORY button.
"01" flashes in the display.
4
Press the
You can select between 1 and 15 presets.
5
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before "number" disappears from the display.
"number" disappears from the display and the station is stored in memory.
6
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
control to select a channel.
• This unit does not receive AM broadcasts.
60
button is pressed, a preset broadcast station is selected.
button to automatically search for active
,
button to increase or decrease the frequency incrementally
,
button to automatically search the band.
button to select <89.10>.
,
button to select preset number.
button on the remote
Convenient Functions
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press the SLEEP button.
Each time the button is pressed, the preset time changes as follows :
10
20
30
60
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed.
Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press the SLEEP button until <OFF> appears on
the display.
Adjusting Display Brightness
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the DIMMER button.
Each time the button is pressed, the brightness of front display will be adjusted.
Mute Function
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
<MUTE> appears in the display.
To restore the sound, press the button again.
90
120
150
OFF.
ENG
61
Advertisement
Table of Contents
