Related Manuals for Techniglass The Grinder
Summary of Contents for Techniglass The Grinder
- Page 1 OPERATION MANUAL STATE-OF-THE ART BREAKTHROUGH TECHNOLOGY Phone: 716.525.1001 www.techniglass.com Made in the USA...
- Page 2 Be sure to register your GRINDER to activate its warranty with the option to gain access to Techniglass Corporation company updates, promotions, and news! Go to techniglass. com and tell us about your new GRINDER experience – any comments and feedback you may have –...
-
Page 3: Safety Precautions
Use only a properly grounded, • three-prong outlet Water from reservoir must not reach • electrical outlet Power off THE GRINDER when • not in use Before grinding, ensure the water • reservoir is adequately filled DO NOT OVERFILL THE •... - Page 4 ASSEMBLY Insert the power cord into inlet Remove the Lift Grid Slide Quick Fit Bit down shaft ® Install Aqua Flow System ® Wet the brush bristles prior to installation...
- Page 5 ASSEMBLY CONTINUED WATER LEVEL Add water until it reaches base of Aqua Flow System Brush Position Lift Grid Install the Guard into slot Insert LumiShield Arm into slot ®...
- Page 6 ASSEMBLY CONTINUED Slide transparent shield into channel 10 Insert Everwear Bit Guard 11 Light /Power Switch...
- Page 7 PREPARING THE GRINDER FOR THE MINI G PLATFORM ® Remove The Guard ® Remove Quick-Fit ® Remove Everwear Bit Guard Remove brush...
-
Page 8: Platform Assembly
MINI G PLATFORM ASSEMBLY ® Install Shaft Water Seal on shaft of LOWER platform Align and Install UPPER platform over shaft Install Aqua Flow System ®... - Page 9 MINI G PLATFORM ASSEMBLY CONTINUED ® WATER LEVEL Add water until it reaches base of Aqua Flow System Brush Install 1/4" or 1/8" jewelry bit Position Lift Grid over UPPER platform...
-
Page 10: Maintenance
MAINTENANCE Power OFF the Grinder Drain water from reservoir Install brush on scraper Scrape excess debris from reservoir surface Brush surface with soap and water to remove additional debris Clean eye shield with soft cloth... - Page 11 SERIAL NUMBER WARRANTY REGISTRATION Be sure to register THE GRINDER serial number, found on your GRINDER, with Techniglass Corporation within 90 days of purchase to ensure warranty validity. Fill out the form included in the or visit www.techniglass.com/grinder/registration to register your GRINDER.
- Page 12 GR.M1.1018.R1 Techniglass Corporation 80 Thompson Street N. Tonawanda, NY 14120 USA Phone: 716.525.1001 www.techniglass.com...