Table of Contents
Advertisement
When you link multiple machines with DMX, we advise you to use the same Safety address for all
machines.
Always plug in a DMX Terminator into the DMX output of the final unit in the
CAUTION
control sequence. Using a DMX Terminator improves signal reliability.
1.8
RDM CAPABILITY
Remote Device Management Protocol (RDM) is an enhancement of the DMX512 communication
protocol. RDM can be used for configuration and status monitoring while DMX512 takes care of
the default DMX controlling.
For RDM you will need a RDM compatible controller, cables and a RDM responder like the
MAGICFX
PSYCO2JET. You can activate or deactivate RDM in the menu, see Section 1.5.
®
The following RDM parameters are supported by the MAGICFX
Parameter ID
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
DEVICE_INFO
SUPPORTED_PARAMETERS
SOFTWARE_VERSION_LABEL
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
SLOT_DESCRIPTION
DMX_PERSONALITY_DESCRIPTION
DMX_START_ADDRESS
IDENTIFY_DEVICE
DEVICE_LABEL
FACTORY_DEFAULTS
DMX_PERSONALITY
DISPLAY_INVERT
PAN_INVERT
RESET_DEVICE
RDM parameters are subject of change due to software updates. Contact MAGIC FX for the latest
information and updates.
Discovery
X
X
X
MAGICFX® PSYCO2JET — User and Installation Manual
PSYCO2JET.
®
GET
SET
X
X
X
X
X
X
X
X
X
X
X
X
X
X
RDM parameters
X
X
X
X
X
X
X
X
13
Advertisement
Table of Contents
