Information; Power Saver (Pc Mode Only) - Samsung Tantus HPM5027 Owner's Instructions Manual

Information

Preset:
• Press the RGB button to select the PC mode.
Press the Menu button. Move the joystick up or
1
down to select the SETUP, then press the joystick to
enter.
Move the joystick up or down to select the "Miscel-
2
laneous", then move the joystick left or right to
enter.
Move the joystick up or down to select the "Informa-
3
tion", then move the joystick left or right to enter.
Press the Menu button to exit.
4
54
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Position
Language English
Scaling Wide
Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit

Information

Multi Control
Key Lock Off
Move Adjust Exit
Horizontal Vertical
Resolution 1024 768
Frequency 48.3KHz 60Hz
Exit

Power Saver (PC mode only)

This monitor has a built-in power management system called Power Saver. This power management
system saves energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. This power management system operates with a VESA DPMS compliant video
card installed in your computer. You use a software utility installed on your computer to set up this fea-
ture. See the table below for details.
Table 1. Power-saving modes
Power-saving Function Mode
Normal
State
Operation
Standby Mode
Horizontal Sync Active Inactive
Vertical Sync Active Active
Video Active Blanked
Power Green Amber Blinking
Indicator (1 sec Interval)
Notes:
• This monitor automatically returns to normal operation when horizontal and vertical sync return.
• This occurs when moving the computer's mouse or pressing a key on the keyboard.
• For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattend-
ed for long periods.
Suspend Mode Power-off Mode
Position A1 Position A2
Active Inactive
Inactive Inactive
Blanked Blanked
Amber Blinking Amber Blinking
(1 sec Interval) (1 sec Interval)
55