Restarting The Air Conditioner Automatically; Cleaning The Air Filter - LG LS090HEV Owner's Manual

Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores
the previous settings. This function is a
factory default setting.
Disabling auto restart
1
Open the front grille.
- Lift up both sides of the cover slightly.
* The feature can be changed according to
type of model.
2
Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp
will blink 6 times.
* The feature can be changed according to
type of model.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp
will blink 4 times.
!
NOTE
• If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test
operation.
• In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default
settings.
Cleaning the air filter
Clean the air filter once every 2 weeks or
more if necessary.
1
Turn off the power and unplug the power
cord.
2
Open the front grille.
- Lift up both sides of the cover slightly.
* The feature can be changed according
3
Hold the knob of the air filter, lift it up
slightly and remove it from the unit.
* The feature can be changed according
ON/OFF
button
4
Clean the filter with a vacuum cleaner or
with warm water.
- If dirt is difficult to remove, wash the
5
Dry the filter in the shade.
!
• The location of the filters may differ,
• The feature can be changed according
ADVANCED FUNCTIONS
to a type of model.
to a type of model.
filter in lukewarm water with detergent.
NOTE
depending on the model.
to type of model.
17