Get Started; Power On & Connect To Last Device; Audio Transparency; Using Fittips - Bragi The Headphone Quick Start Manual

Get started.

3 sec.
To enter pairing mode hold
until the right LED starts blinking.
Select BRAGI HP in the Bluetooth
settings on your device.
Before pairing to a new device, make sure
your Headphone is switched off.
Press.
Hold.
for 3 seconds
Insert. PerfectFit.
Try different FitTips for the PerfectFit.
Power on & connect to last device
1 sec. LED is on until your Headphone is connected
Play / P ause / A nswer call
Press
Next track
2× Press
Previous track
3× Press
End call / V oice Assistant
1 sec.
Power off / Pairing mode
3 sec.
LED blinks x4 / blinks until your Headphone is connected
Volume up
Press
Audio Transparency on
1 sec.
Volume down
Press
Audio Transparency off
1 sec.
3