Meters; Weight - Dan Dugan Sound Design Dugan-MY16 User Manual

Dugan-MY16 User Guide

Meters

The meters have three display modes.
auto mix gain
input
output
The default meter display is
operation; the input and output meters are only used when setting or checking levels.
Click on the Master

Weight

The controls set the side-chain levels for each channel into the control system.
weight
This establishes the relative sensitivity of the automatic mix for the channels in use.
They do not change the mix levels. When the
an equal opportunity to take over the system: when one person talks into one mic,
he/she gets all the
The controls should be used to balance the channel
weight
when no one is talking. If a board preamp trimmer is turned down, that channel's
control can be turned up to re-balance the automixing, and vice-versa.
weight
Weights can be changed by dragging the sliders or by entering dB values in the win-
dows below the sliders. Ctrl-click the
Touch and hold the weight slider to reset its value to 0.
iPad
Meter Displays
action of the Dugan Speech System
input level
output level
Table 3-1 Meter modes
auto mix gain
button to toggle through the three meter display modes.
meters
and the others get turned down.
auto mix gain
Figure 3-8 Weight controls
. This is the most useful choice during normal
controls are balanced, each mic has
weight
slider to reset its value to 0.
weight
31
The Dugan Control Panel
Meter Color
green
yellow
blue
indicators
auto mix gain