Top Pane; Add Units Manually - Dan Dugan Sound Design Dugan-MY16 User Manual

Dugan-MY16 User Guide

Top Pane

The Top Pane displays all connected Dugan units. The active unit is enclosed by a
yellow rectangle. Click on another unit to select it and deselect the previous unit.
Some Yamaha mixers have multiple card slots that can be used for additional Dugan-
MY16s.
All connected Dugan units appear in the Top Pane. If all connected units do not ap-
pear in the Top Pane, see Establishing Network Connections on page 17.
To display a unit's IP address, hover the mouse over the unit's name.
To display a unit's IP address, touch and hold the unit's name.
iPad

Add Units Manually

To add a unit manually with a known IP address, click the + sign at the right of the
Top Pane and enter the IP address in the dialog that appears.
To add a unit manually without a known IP address:
1. Hold down the blue NETWORK RESET button on the rear panel for 3 seconds.
2. Click the + sign at the right of the Top Pane.
3. Enter the default IP address: 192.168.1.xx
xx = last two digits of serial number, unless they are 00, in which case enter 100.
4. Click OK to exit the dialog.
To display a unit's IP address, hover the mouse over the unit's name.
Figure 3-2 Top Pane
24