Samsung PS63A756T1M User Manual page 30

Cable Network Setup-Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. Please check
if the LAN cable is connected. (See page 27)
1. Set Network Selection to Cable.
. Select Cable Network Setup.
3. Set Internet Protocol Setup to Auto Setup.
4. Select Network Test to check the network connectivity.
Cable Network Setup-Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). Please check if the LAN cable is
connected. (See page 27)
1. Set Network Selection to Cable.
. Select Cable Network Setup.
3. Set Internet Protocol Setup to Manual Setup.
4. Set up IP Address, Subnet Mask, Gateway and DNS Server.
Press the number buttons on the remote control when you set the Network manually.
N
5. Select Network Test to check the network connectivity.
Wireless Network Setup-Auto Setup
The menu is activated only if the 'Samsung Wireless LAN Adapter for InfoLive' is connected. (See page 28)
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. The wireless
IP sharer to be connected to this product must support DHCP.
1. Set Network Selection to Wireless.
. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Auto Setup.
4. Select an AP through Select Access Point.
5. Select Network Test to check the network connectivity.
Wireless Network Setup-Manual Setup
The menu is activated only if the 'Samsung Wireless LAN Adapter for InfoLive' is connected. (See page 28)
1. Set Network Selection to Wireless.
. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Manual Setup.
4. Select an AP through Select Access Point.
5. Select Network Test to check the network connectivity.
English - 30