Samsung PS50A450 User Manual page 7

Rear Panel
9
or
8
➢
The product colour and shape may vary depending on the model.
☛
 Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
 When connecting an external device, match the colour of the connection terminal to the cable.
1 ANT IN
75Ω Coaxial connector for Aerial/Cable Network.
2 SERVICE
− Connector for service.
− Connect the serial jack between the
electro-motion wall mount bracket and your
TV when you want to adjust the TV viewing
angle using your remote control.
3 Connecting external Audio Devices
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
4 D SYNC OUT
Connect to 3D IR Emitter
5 COMPONENT IN 1, COMPONENT IN 
Audio (AUDIO L/R) and video (Y/P
for Component.
6 PC IN(PC) / AUDIO
Connect to the video and audio output jack on your PC.
7 AV IN 1(VIDEO / AUDIO R/L)
Connect RCA cable to an appropriate external
A/V device such as VCR, DVD or Camcorder.
8 HDMI IN 1, 
- No additional Audio connection is needed for an
HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you
must use the HDMI IN 2 jack.
7 6
5
/P ) inputs
B R
English - 
4
3
➢
What is HDMI?
- " High Definition Multimedia interface" allows
the transmission of high definition digital
video data and multiple channels of digital
audio.
- The HDMI/DVI terminal supports DVI
connection to an extended device with
the appropriate cable (not supplied). The
difference between HDMI and DVI is that the
HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection)
coding feature installed, and supports multi
- channel digital audio.
DVI IN (HDMI ) AUDIO R/L
DVI audio outputs for external devices.
9 POWER IN
Connect the supplied power cord.
Supported modes for HDMI/DVI and Component
480i 480p
HDMI/DVI 50Hz X X
HDMI/DVI 60Hz X O
Component O O
1
or
Cable Television
Network
2
576i 576p 720p 1080i
X O O O
X X O O
O O O O