Samsung PS50A450 User Manual page 23

For more information on the 3D glasses (including the Emitter), refer to the user manual of your 3D glasses.

Adjust the PC resolution

- PS42A450 : 1024 x 768@60Hz
- PS50A450 : 1024 x 768@60Hz
1360 x 768@60Hz
The 3D IR Emitter communicates with the 3D glasses.

Therefore, the 3D IR Emitter should be located near the 3D glasses.
It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.

When the power is turned on or off, the mode changes to the default (Off) and the Format is saved.

The D Effect is turned on or off regardless of the Picture Mode.

When D Effect is on, only the Contrast, Brightness, D Effect, and Reset picture menus are

activated.
To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.

The 3D glasses and the Emitter must be manufacturer by the same company.

If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may

experience eyestrain or a headache.
3D glasses (including the Emitter) not manufactured by Samsung may not be supported.

If you find the screen flickering while the 3D function is used, change the environmental lighting

darker or turn off the fluorescent lamp to watch the screen for its best condition.
Changing the Mode
Provides the function to turn on the D Effect. You can choose
between Mode1 and Mode. To achieve the D Effect, the 3D
glasses shutter back and forth from the left to right and vice versa
(left/right sync).
1 Connect the TV, PC and 3D IR Emitter as shown in the figure.
 Press the SOURCE button to select HDMI .
 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the
ENTER button.
4 Press the ▲ or ▼ button to select Picture Options then press
the ENTER button.
Press the ▲ or ▼ button to select D Effect then press the
ENTER button.
5 Press the ▲ or ▼ button to select Mode, then press the
ENTER button.
Press the ▲ or ▼ button to select Off, Mode1 or Mode then
press the ENTER button.
• Off : Turns the 3D Effect function off.
• Mode1 : Mode 1 operates with right sync first.
• Mode : Mode 2 operates with left sync first.
If the 3D effect is not working properly, it means the Mode and

3D glasses may not be syncing properly. To put them in sync,
switch to the other mode.
Changing the Format
Select the optimal input format to match your graphic cards or 3D
software.
See the descriptions for Steps 1 to 4 above.
5 Press the ▲ or ▼ button to select Format, then press the
ENTER button.
 Press the ▲ or ▼ button to select Checker Board, Horizontal
or Vertical then press the ENTER button.
If the output format of your graphic card or 3D software
Checker Board
is Checkerboard, select this input format.
If the output format of your graphic card or 3D software
Horizontal
is Horizontal interleaved, select this input format.
If the output format of your graphic card or 3D software
Vertical
is Vertical interleaved, select this input format.
English - 
T V Picture
Mode : Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint G 50
Detailed Settings
Picture Options
Reset : OK
Move Enter
T V Picture Options
Colour Tone : Normal
Size : 1:
Digital NR : Auto
Real 100Hz Demo : Off
DNle : On
HDMI Black Level : Normal
Blue only mode : Off
Screen Burn Protection
D Effect
Move Enter
T V D Effect
Mode : Mode 1
Off
Format : Checker Board Mode 1
Mode 
Move Enter
T V D Effect
Mode : Mode 1
Format : Checker Board
Checker Board
Horizontal
Vertical
Move Enter


5
45
50
50
R 50



Return









Return
Return
Return