Plug & Play Feature - Samsung PS-50P4H1 Owner's Instructions Manual

Plug & Play Feature
Plug & Play
Press ENTER to Start Plug & Play
Start
Enter Exit
Language
Move Enter
Plug & Play
Antenna Input Check
Country
Country
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
▼ More
Move Enter
Auto Store
Press ENTER to start channel memory
40 MHz
0%
Start
Enter Stop
Auto Store
Channel store in process.
57 MHz
1%
Stop
Enter Stop
Clock
Hour Min
01 00
Adjust Move Stop
Enjoy Your Watching
English - 16
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1
If the television is in standby mode, press the POWER (
on the remote control.
Result: The message Plug & Play is displayed, and then the
Language menu is automatically displayed a few
seconds later.
2 Select the appropriate language by pressing the ... or † button.
3
Press the ENTER (
Result: The message Antenna input check is displayed.
4
Make sure that the antenna is connected to the TV, and then
press the ENTER (
Result: The Country menu is displayed.
5 Select your country by pressing the ... or † button.
6
Press the ENTER (
Result: The Auto Store menu is displayed.
7
To start the search, press the ENTER (
Result: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the Clock Set menu is displayed.
➢
To stop the search before it has finished or return to normal
viewing, press the MENU (
➢
Press the ENTER (
8 Press the œ or √ button to move to the hour or minute.
Set the hour or minute by pressing the ... or † button.
9
When it has finished, the message Enjoy Your Watching is
displayed, and then the channel which has been stored will be
activated.
) button to confirm your choice.
) button.
) button to confirm your choice.
) button.
) button.
) button to set the clock.
) button