Purpose Of Use; Work Area Safety; Battery Charger Safety - Launch Flashpower 120 Instructions For Use Manual

INSTRUCTIONS FOR USE
OPERATING MANUAL AND INSTRUCTIONS FOR ELECTRONIC MULTIPURPOSE 12V
BATTERY CHARGER.
CAUTION
IMPORTANT! READ THIS MANUAL CAREFULLY BEFORE USING THE BATTERY
CHARGER. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
Store the safety instructions with care and hand them over to the users.

PURPOSE OF USE

The electronic battery charger can be used for the following purposes:
• charging and supplying power to motor vehicles;
• use on 12V, Wet - Agm - lithium (LiFePO4) batteries;
• reprogramming and self-diagnosis.
The electronic battery charger must not be used for the following operations:
• use on batteries other than 12V
• use in humid or wet environments, or in bad weather;
• use for any applications other than stated ones.

WORK AREA SAFETY

Do not operate the battery charger in environments containing potentially explosive
the dust or fumes.
Keep children and bystanders away from your workplace while operating the battery charger.
Distractions from other people can cause you to lose control over the battery charger during use.
Do not inhale any harmful gases that may be released by the battery of the motor vehicle while
working on the engine.
During connection operations, keep your face away from the motor vehicle battery. The battery
contains corrosive liquid; in the event of accidental contact with your skin or eyes, rinse
immediately with water and seek medical advice.
Do not drop any metal tools on the motor vehicle battery: it may short-circuit.
Use the battery charger in a dry area, avoiding humidity.

BATTERY CHARGER SAFETY

• Before use, check that the battery charger has not been damaged, and that there are no uncovered
cables or worn parts.
• Do not use the battery charger when damaged, to avoid the risk of electric shocks; do not try to open
or modify it.
EN
11