System; Figure 4.22 Iserver System Page - Omega C4EIT User Manual

Embedded ethernet for iseries monitor/controller
Table of Contents

Advertisement

4.5.11 System

This page provides various options to reboot, restore defaults, upgrade firmware and
download/upload configuration for the iServer. Fields are described below.
Reboot – Clicking on OK button will reboot the iServer.
After rebooting, please wait 15 seconds before reconnecting.
Defaults – Clicking on OK button will reset the iServer to factory default settings.
After Defaults, you need to reboot.
Upgrade – Before proceeding with the firmware upgrade, enter the name of the file
you plan to use, click on Check File Name button.
If OK, a new screen will appear and you can then browse to the actual upgrade
firmware file "iSeries_EIT_x.bin" and click on the Upload button.
After the file has upgraded the iServer will automatically reboot and load the new
firmware, you will be returned to the Welcome page.
Before upgrading, it is recommended to save the configuration Download
Config.
After upgrade load Defaults. IP default is 192.168.1.200.
It is recommended to reboot after loading Defaults.
If you do not reboot the unit will not load the configurations.
After connecting to the IP via the web browser, upload the saved
configuration file, Upload Config.

Figure 4.22 iServer SYSTEM Page

36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eit

Table of Contents