Installing The Display Vertically; Before Using The Video Wall And The Multiple Display Control Function - Samsung PPM42M5H Owner's Instructions Manual

Installing the Display Vertically

Before Using the Video Wall and the Multiple Display Control function

1
Please create ID for each PDP Monitor before
installing them close together. It may be difficult to
create IDs when operating the remote control for
PDPs that are installed close to each other.
2
For details about Video Wall configuration and
operation, refer to "Setting the Multiple Screen"
on page 33.
Rear of the PDP Monitor
➢
◆ You can connect a VCR without a distributor
as you would connect a PC.
◆ Select ID input on the menu. Use the numeric
buttons to enter the ID for PDP Monitor
adjustment. You can operate the remote
control only for the PDP Monitor that has been
selected.
◆ For details about Multiple Display Control, refer
to "Setting the MDC (Multiple Display Control)"
on page 29 and the Help section in MDC
program CD.
English - 12
You can install the PDP Monitor vertically. In this case, the fan
automatically works. If you wish to stop the fan, position the PDP
Monitor horizontally and then set "Fan" to "Off" in the
"Function" menu.
Please use the wall attachment panel exclusively when installing
vertically. And you have to put left side of the PDP Monitor on top
when viewed from front.
Example for 2x2 Video Wall connections
②
①
Example for Multiple Display Control connections
Example for 2x2 Video Wall function
Rear of the PDP Monitor