Advertisement
Quick Links
R
ASSEMBLY INSTRUCTION
NC*FRX & NC*MRX
A
B
C
D
E
F
18
4
G
Page 1
|
XLR Cable Connector
A
Slide the boot onto the cable.
B
Prepare cable as shown.
C
Insert wires into the terminals and solder
them.
Position the sleeve over the cables.
D
E
Slide insert into the housing until it snaps
in.
Align insert with housing.
F
Position the cable.
G
Slide the chuck into the housing.
Pay attention to position chuck as shown.
Advertisement
Related Manuals for NEUTRIK NC*FRX series
Summary of Contents for NEUTRIK NC*FRX series
- Page 1 ASSEMBLY INSTRUCTION NC*FRX & NC*MRX XLR Cable Connector Slide the boot onto the cable. Prepare cable as shown. Insert wires into the terminals and solder them. Position the sleeve over the cables. Slide insert into the housing until it snaps Align insert with housing.
- Page 2 Vertriebs GmbH T: +49 8131 / 280 890 F: +49 8131 / 280 830 Draft. Nr.: BDA 173-0 / 3102M1441 Update: 13.07.2011 Data subject to change without prior notice. © 2011 NEUTRIK . ALL RIGHTS RESERVED. ® www.neutrik.com Page 2...