SpyCameraCCTV GTIP2PHWF Quick Setup Manual

Quick Set-up Guide

Before You Begin

• Test the Wi-Fi strength where you would like to place the camera using a smartphone or tablet
• The camera has the ability to work with a MicroSD card (up to 128GB) so insert the card into
the slot in the camera before you power up, if you want to record footage
• Plug in the power supply into the trailing cable of the camera

Download the App

To view the camera on your smartphone or tablet device you need to download the app. Search
for XMEye on Apple App Store or Google Play Store or scan the QR codes below.
 iOS  Android

Connecting to the Camera Directly

First, you need to connect to the Wi-Fi camera directly to activate it. When the
camera is powered up, open the Wi-Fi settings on your smartphone or tablet
and the network with the following name should appear beye_***. Select and
enter the password 1234567890
Should this Wi-Fi Network not appear it may mean that you need to reset the
camera. To do this press and hold the reset button on the end of the trailing
cable for 15 seconds.
Once connected, open the app and select Direct Login in the bottom right of the screen. Your
camera will be listed, so simply tap on it to check that you are receiving live images.
This method of connecting has limited functionality as you won't be able to view the camera
remotely or from other devices on your network. Furthermore, the range of the Wi-Fi from the
camera in this mode is limited. Therefore, we would recommend to now connect the camera to
your Wi-Fi network.
See overleaf