Storing Channels In Memory (Automatic Method); To Check The Channels Stored In Memory; To Select Channels Over 100 - Samsung LT-P1745U Owner's Instructions Manual

O
P E R AT I O N

Storing Channels in Memory (Automatic Method)

1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the MENU button.
Press the
UP/DOWN buttons
to select "Channel", then
press the ENTER
button.
2
Press the
UP/DOWN buttons
to select "Auto Program".
Press the ENTER
button.
3
Press the ENTER
button.
The TV will begin
memorizing all of the
available channels.
4
After all the available
channels are stored,
the Auto Program menu
reappears.
Press the EXIT button
to exit.

To check the channels stored in memory

Press the CH button.
/
Only the channels stored in memory are selected.

To select channels over 100

Ex) Press to select channel 108.
17
English-
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press at any time to
ENTER
interrupt the memorization process
and return to the CHANNEL menu.
Note: You can also press the
AUTO PROG. button to select
available channels.