Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung LT-P1745U Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is
connected to the
ANTENNA OUT
terminal on your cable
box.
2
Connect the other end
of this cable to the TV
ANTENNA terminal on
the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect
the cable that is
connected to the
ANTENNA IN terminal
on your cable box.
2
Connect this cable
to a two-way splitter.
3
Connect a coaxial
cable between an
OUTPUT terminal on
the splitter and the IN
terminal on the cable
box.
8
English-
This terminal might be labeled
"ANT OUT", "VHF OUT", or
simply, "OUT".
This terminal might be labeled
"ANT IN", "VHF IN", or simply,
"IN".