Table of Contents
Advertisement
Changing Channels
Using the Channel Buttons (CH
5
6
Press the
CH
or
CH
When you press the
CH
that the unit has memorized.
You will not see channels that were erased, not memorized or unavailable.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel:
Input the channel using the
To select a two-digit channel:
Input the channel using the
To select a three-digit channel:
Note:
Be sure to enter the channel within 3 seconds.
When you use the number buttons, You may directly select channels that were erased.
Using the RETURN
button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL-and VOL+)
Press the
VOL +
or
VOL-
Using the Mute
Using the MUTE
button
At any time, you can temporarily turn off the sound using the
1
Press the
MUTE
button and the sound turns off.
2
To turn mute off, press the
5
6
or CH )
to change channels.
5
6
or
CH
, the unit changes channels in sequence. You will see all the channels
0-9 number buttons
0-9 number buttons
to
increase
or
decrease
MUTE
button again, or simply press either the
directly and then press
ENTER
directly and then press
ENTER
the volume.
MUTE
button.
Basic Operations
or wait for 3 seconds.
or wait for 3 seconds.
VOL -
or
VOL+
.
21
Advertisement
Table of Contents
