Setting Auto Fine Tune (Aft); Manual Fine Tuning; Adding And Erasing Channels - Acoustic Research AR4200 Operating Instructions Manual

Memorizing TV Channels

Setting Auto Fine Tune (AFT)

1
Repeat steps 1~4 in [
display search menu page.
6
Press CH repeatedly to select
2
3 Press VOL+/- to select
When the AFT is set to On, the unit will automatically tune
the program frequency to provide the best possible
picture and sound.

Manual Fine Tuning

1
Repeat steps 1~4 in [
display search menu page.
2
6
Press CH repeatedly to select
3
Press VOL+/- to fine tune till the best possible picture and
sound are obtained.
If you fine tune a program manually, the
item will be turned to

Adding and Erasing Channels

1
Use number buttons
be added or erased.
2
Repeat steps 1~4 in [
display search menu page.
3
6
Press CH repeatedly to select
Press VOL+/- to select
4
When the item is set to on, the selected channel will be
erased. When the item is set to
channel will be added.
The erased channels can not be selected by using the
5 6
CH / buttons unless you use
channel number directly.
20
(continued)
Selecting the Signal Source
auto fine tune
on or off.
Selecting the Signal Source
fine tune item.
auto fine tune
off automatically.
to directly select a channel that will
Selecting the Signal Source
channel skip
on or off.
off, the selected
number buttons
] to
search
source
autoset
item.
auto fine tune
fine tune
channel skip
right/left to adjust automatic fine tune
] to
search
source
autoset
auto fine tune
fine tune
channel skip
search
source
autoset
] to
auto fine tune
fine tune
channel skip
item.
to input
antenna cable
<select> to enable
off on
50
off on
antenna cable
<select> to enable
off on
off on
right/left to adjust fine tuning
antenna cable
<select> to enable
off on
off on
right/left to set channel skip
50
50