BREWISTA Cold Pro Quick Start Manuals

Cold Pro™ Commercial Cold Brew Coffee System
QUICK START GUIDE
Start Here

Before You Begin

1
Determine the combination of filters desired.
Permanent Filter
(always used)
+
AND/OR
Paper Filter
(optional)
Components
Paper Filter
Permanent Filter
Scan for video
10 gallon Rubbermaid Brute®
and adaptor ring
Insert the appropriate adaptor ring
2
into the brewing vessel.
Position and turn
3
the permanent filter so
it rests below the rim of
the bucket.
Finishing Filter
(optional)
Dispensing Spigot
Outlet Filter
Cafetto
Cold Pro™ Cleaner
Outlet Filter Holder
Carlisle Bain Marie® Curtis® TC-10H 10 gallon
22 quart white bucket stainless steel tea dispenser
and adaptor ring and adaptor ring
(Rubbermaid
10 gallon Brute®
bucket pictured)
Assemble Cold Pro™ System
Note: Detailed assembly instructions can be found in
the owner's manual.
• Install the spigot with one rubber washer on each
side of the bucket wall.
• Secure the spigot with the hex nut.
• Attach the outlet filter holder.
• Insert the polyfiber outlet filter.
• Install the appropriate adaptor ring for your
brew vessel.
Insert paper filter
4
•
The paper filter is
optional, but highly
recommended for
easier clean up and
better refinement.
•
Do not fold the
orange handles over
the paper filter.