Important Safety And Environmental Instructions; General Safety; Electrical Safety - Beko BRH90CX User Manual

Important safety and environmental
1
instructions
This section contains safety
instructions that will help protect
from risk of personal injury or
property damage. Failure to follow
these instructions invalidates the
granted warranty.

1.1 General safety

• Always have the installation and
repairing procedures carried out
by the Authorised Service Agent.
Manufacturer shall not be held
responsible for damages that
may be caused by unauthorised
persons.
• This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge.
Children should be supervised to
ensure that they do not play with
the appliance.

1.1.1 Electrical safety

• Always unplug the appliance
from the mains supply during
installation, maintenance,
cleaning and repair operations.
Hood / User Manual
• If the power cable is faulty,
it should be replaced by a
qualified person certified by
the manufacturer, after-sales
service or similar (preferably an
electrician) or a person described
by the importer.
• Operating voltage is 220 to 240
volts.
• If the appliance has a failure, it
should not be operated unless it is
repaired by the Authorised Service
Agent. There is the risk of electric
shock!
• Do not route power cable close
to hobs. Otherwise power cable
may cause fire since it melts down
easily.
• Never plug the hood before
installation is completed.
• In order to obtain the best
performance, external conductor
must not be longer than 4 m. It
must not contain more than 2
perpendicular (90°) angles and its
diameter must be min. ø120 mm.
• Disconnect the appliance from
mains before any intervention to
the internal parts of the appliance.
• Use the appliance with a grounded
outlet only.
3 / EN