LG KBB-700 User Manual

Before Using
y There may be compatibility issues when connected to some other products.
LG Electronics does not guarantee compatibility with all peripherals.
y Functions may vary depending on the device and OS.
y The stand may not hold a particular device depending on the type and
orientation of the device. The angle may vary depending on the device.
Product Overview
a LED indicator
Bluetooth®
Keyboard
b
Key pad
c
Rolling magnets
User Guide
a
Stand
KBB-700
b
Battery cover
www.lge.com
1
Using Product
Install the batteries
- When using the keyboard for the first time, open the battery cover at the top
center of the keyboard by pressing your fingernail against the slit on the battery
cover.
- Remove the protective film between the AAA battery included in the keyboard
and the positive (+) and negative (-) poles. Insert the battery in the correct
direction, then close the cover.
Position a device
- Open out the stand by pressing your fingernail against the slits on the top left
and right of the keyboard, then place your device on the stand.
2
Power off
- When you turn off the product, be sure to close it in the direction of the arrows.
* Failure to follow the instructions in this manual may result in fault or malfunction
and the product may not turn off properly.
Pair the Keyboard with a Device
This product can be connected and used with up to two Bluetooth devices.
Set up your Bluetooth device by following the instructions below:
Pair the keyboard with Android OS or iOS device
LED Indicator
1. Turn on the keyboard by opening it completely.
2*. Press and hold down the "Fn + B (Pair)" keys for at least two seconds.
- When in pairing mode, the LED indicator blinks at one-second intervals for
two minutes.
To check the paired device and the battery level, press the "Fn + Space" keys.
3. Search for the device on the device you want to pair with, or select Rolly
The LED indicator lights up accordingly.
Keyboard among the searched devices.
- Some devices may require you to enter a PIN. Enter a PIN and press Enter.
Paired device
4. When pairing is complete, the LED indicator turns blue for three seconds and
then dims.
To pair with the second device, do the following instructions before step 2*.
Press the "Fn + D (Shift)" keys on the keyboard to enter pairing standby mode for
Battery level
the second device. Check if the LED color changes from blue to purple.
Battery level is at 15% or above
The LED blinks when the battery level is low. When the battery runs low or is fully
discharged, replace it with a new AAA battery.
3
Precautions
Pair the keyboard with a device running Windows 7 or 8
1. Turn on the keyboard by opening it completely.
y Do not use the product in a damp place such as a laundry room or bathroom.
2. Press and hold down the "Fn + B (Pair)" keys for at least two seconds.
This may result in malfunction or electric shock. Always use the product within
- When in pairing mode, the LED indicator blinks at one-second intervals for
the recommended temperature and humidity range of 10 to 35ºC and 20 to
two minutes.
80% RH.
3. Select Control Panel > Add devices and printers > Add a device.
4. Select "LG-Rolly Keyboard". y Always use the product in a clean, dust-free environment.
- Follow the onscreen instructions to complete the pairing. Otherwise this may cause a malfunction.
5. When pairing is complete, the LED indicator lights up for three seconds and y Set up the product on a stable base with no risk of falling.
then dims.
Otherwise this may result in damage to the product or personal injury.
y Do not place heavy objects on the product.
y Some keys may not be supported by Windows OS.
Failure to follow this precaution may result in malfunction. Such objects may fall
y Once paired, the pairing process above does not need to be repeated.
and cause personal injury or damage to the product.
y If you pair a new device when the keyboard has already been paired with two
y Spilling water, coffee, juice or any other liquid on the keyboard may result in
devices, the last paired device is unpaired.
damage to the product or malfunction.
y Do not place glasses or containers containing chemicals or water on or
near the product.
How to use keys
If water gets inside the product, this may cause a fire.
y Do not place a lit candle, cigarette etc. on the product.
- To enter characters (symbols or numbers) marked with the same color as the Fn
This may result in a fire.
key, press the relevant key combo together with the Fn key.
y The underside of the product may become hot while in use. Avoid touching it
- Example of one key containing three different characters (a letter, a symbol, and
or using the product on your lap.
a number)
y After having the product serviced, ask a technician to perform a safety check
ex)
Activity Key input
on it.
Using the product without a post-servicing safety check may result in fire.
q Q
y Keep the product away from heating appliances.
Q Shift + Q
Being too close to a heat source may cause the product to deform or set on
1 Fn + Q
fire.
! Fn + Shift + Q
y Do not leave the product unattended in a vehicle.
This may result in explosion of the battery or fire due to high temperature.
- Example of one key containing four different characters (symbols)
y When not using the product for a long period of time, turn the power off to
ex)
Activity Key input prevent unnecessary use of the battery power.
y Always use parts approved by LG Electronics Inc™.
] ]
Otherwise this may result in fire or damage to the product.
} Shift + ]
y Do not disassemble or modify the product.
= Fn + ]
Doing so can void the warranty, even within the warranty period.
+ Fn + Shift + ]
4
- Hot key y Be careful when touching a part or device.
Incorrect handling may result in damage to the product.
Volume up Fn + w
y When removing a part or device from the product, be careful not to drop it.
Volume down Fn + s
The dropped part or device may cause personal injury or damage to the
Rew Fn + a product.
y The magnets and small parts of the product are a swallowing hazard for
F.F Fn + d
children.
Play / Pause Fn + Enter
y If you have a medical device implanted, consult your doctor before using the
Search Fn + S
product.
Text cut Fn + X
y The fabric used between the key rows may not withstand excessive pulling and
twisting and should be handled with care.
Text copy Fn + C
y The magnets used in the product may damage magnetic cards or affect the
Text paste Fn + V
operation of pacemakers, etc.
Start key Fn + Cmd
y When on board an aircraft, always follow the crew's instructions.
Language select Earth mark ( ) Incorrect use of the product on the airplane may result in aviation accidents.
■ y Keep the product away from direct sunlight when in a confined space such as
Home
a car.
Fn + ■
Delete
Direct sunlight may cause deformation of the product or fire due to the
increase in temperature.
y Do not store the product in a confined space such as a bag for a long period
of time, or repeatedly, with the power on.
This may result in a fire due to the battery overheating.
1st Device Blue LED
2nd Device Purple LED
Status Action
Blinks blue five times
Battery level is at 5 to 15% Blinks red five times
5
Battery precautions
.
Warning :
Follow the instructions below to ensure safe and efficient use of the battery.
y Keep the battery out of reach of pets and children.
y When visibly swollen or corroded, the battery may be hazardous.
Please contact the manufacturer or seller.
y Keep the battery away from heat sources. (Never place in a microwave oven.)
y Do not keep the product in a confined space for a long time with the power
on.
y Ensure the battery connectors do not come into contact with metal objects
such as necklaces, coins, keys and watches.
y Only use batteries approved by the manufacturer.
y Never disassemble, modify, compress or pierce the battery. If the battery has
been severely impacted, discard and replace it immediately.
y Do not drop the battery from a height or subject it to impact or shock.
y Store the battery at room temperature (0ºC to 50ºC) and never expose it to
temperatures of 60ºC or above.
y Do not touch the battery with wet hands or allow it to come into contact with
moisture.
y There is a risk of explosion if the battery is not replaced correctly. Dispose of
used battery according to the manufacturer's instructions.
y For safety purposes, be sure to read the user guide before using the product.
y Always store the battery in a protective battery case to prevent external shock.
6
WARNING: This product contains chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm. Wash hands after
handling.
Part 15.19 statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Part15.21 statement
Changes or modifications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user's authority to operate the
equipment.
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. if this equipment does cause harmful interference or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
7
Troubleshooting
Batteries can overheat, explode and catch fire.
The keyboard does not operate following installation or is not recognized.
y Make sure the batteries are not too weak.
y To determine whether the keyboard or tablet causes the problem test the
keyboard on a second tablet if possible; or test another keyboard on your
current tablet.
If you are still unable to solve the problem, please contact your point of sale or
your dealer.
If you need to exchange the keyboard, please note that you must return it to your
dealer in its original packaging and also a produce proof of purchase (receipt).
Keep your receipt in a safe place after purchase.
Standard
Frequency range
Operating temperature: 10°C to 40°C
8
9
Bluetooth 3.0
2402 ~ 2480 MHz
10