General Tips; Handling And Storage - ProBreeze PB-S01 Instruction Manual

USING THE STEAMER
- Plug the steamer power cord into an electrical outlet.
- Press the ON switch - the heat indicator light will illuminate when turned on.
- The steamer will emit steam after approximately 50 seconds.
- Direct the steam nozzle towards the fabric. Always hold upright to avoid spillage
- Once the water has run out, turn off the steamer. Never fill up with cold water
when the steamer is still warm.
TIPS FOR STEAMING FABRICS AND LINENS
- Direct the steam nozzle towards the material you wish to steam.
- Keep the flow of steam focused on the material. Using a slight back and forth
motion will further enhance the steaming process.
TIPS FOR STEAMING GARMENTS
- Place the garment on a clean hanger.
- Begin steaming slowly from the bottom to the top of the garment. The steam will
rise along the inside and outside of the fabric, removing the wrinkles.
- Periodically point the steamer away from the garment and smooth the fabric with
your free hand.
- Repeat the above steps as necessary until the garment is free of wrinkles.

GENERAL TIPS

-
Steaming both sides of the fabric will help to remove stubborn wrinkles.
-
Delicate fabrics need to be steamed carefully to avoid damage caused by water
spotting.
-
Drapery and curtains can be steamed while still hanging.
-
To steam towels, handkerchiefs and napkins, hang them over a rod or towel holder.

HANDLING AND STORAGE

-
Tap water can be used although distilled water will prevent buildup of minerals
and lime scale.
-
Always empty any remaining water after use to minimise mineral buildup.
-
Store the steamer in a cool, dry place.
English | 2