Table of Contents
Advertisement
Available languages
Available languages
SAFETY WARNINGS
Using the Pro Breeze Fabric Steamer incorrectly can result in burns to skin and
serious injury. Please ensure you read this manual in full including the warnings
below before using the appliance.
1.
This product produces boiling hot steam. Never direct the appliance towards people or
animals.
2.
Never fill water above the MAX line indicator. Doing so will cause water to boil over and
burn the skin.
3.
Do not tilt more than 45-degrees and only use in an up or down vertical position.
Failing to do this may result in boiling water spill.
4.
Never turn the product upside down.
5.
Do not fill the water reservoir when the power cord is plugged in.
6.
Always allow the appliance to cool down for at least 10 minutes after use.
7.
Never add cold water to hot water inside the reservoir.
8.
Burns may occur from touching hot parts, hot water or steam. Always ensure the
appliance is cool before emptying or adding water.
9.
Do not operate any appliance with a damaged cord, plug or steam hose.
10.
Do not operate the appliance if it shows signs of damage.
11.
Do not disassemble or attempt to repair the appliance.
Do not immerse the appliance in water or any other liquid.
12.
13.
Do not steam garments while they are being worn.
14.
Disconnect the appliance from any electrical outlet when adding or removing water.
15.
Do not operate without water.
16.
This appliance is intended for use on fabrics only. Do not use as a cleaning appliance
for anything else.
17.
Keep out of reach of children.
FILLING THE STEAMER WITH WATER
1.
Place the steamer on a flat, level surface.
2.
Remove the steamer nozzle.
3.
Fill the water reservoir with between the MIN and MAX indicators
4.
Re-attach the nozzle
1 | English
- Fabric Steamer 850
Advertisement
Table of Contents
