TKO 876HP Instruction Manual

Model 876HP Hyper Extension

IMPORTANT SAFETY INSTRUCTIONS

TKO Fitness products are designed and manufactured to the highest standards in order to provide
you with years of great workouts. We proudly stand behind all our products with the best customer
service in the fitness industry. If you have any question or need assistance please contact us at:
Customer Service: customerservice@tko.com
Toll free: 866-856-3488 or 713-895-9270
Monday-Friday 8:30am to 4:30pm CT
• Exercise equipment has moving parts. In the interest of safety, keep others, especially children, at
a safe distance while exercising.
• Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. Never
hold your breath while exercising.
• Remove all jewelry, including rings, chains and pins before commencing exercise.
• Always wear suitable clothing and footwear during exercise. Do NOT wear loose fitting clothing
that could become entangled with the moving parts of your exercise machine.
• Rest adequately between workouts. Muscles tone and develop during these rest periods.
• Replace the worn parts immediately.
• Most exercise equipment is not recommended for small children. Children should not use the
machine unless they are under adult supervision.

MEDICAL WARNING

• Before beginning any exercise program, consult your personal physician. Evaluate your present
fitness level and determine the exercise program that is most appropriate for your particular age
and condition.
• If you experience any pain or tightness in your chest, irregular heartbeats, shortness of breath,
faintness or other unusual discomfort while exercising, stop and consult your physician before
continuing.
Maximum recommended exercise weights not to exceed 330Lbs (150Kgs)
TKO Sports Group USA Limited
7354 Denny Road, Suite 100
Houston, TX 77040

ASSEMBLY STEPS

Step 1
Attach the Front Stabilizer (2) to the Main Frame (1), using 2 Carriage Bolts (36), 2 Flat
Washers (37) and 2 Lock Nuts (40).
Step 2
Attach the Rear Stabilizer (3) to the Main Frame Assembly (1), using 2 Carriage Bolts (36),
2 Flat washers (32) and 2 Lock Nuts (40).
Step 3
Attach the Handlebar Post (5) to the Thigh Pad Adjustable Post (4), using 2 Allen Bolts
(29), 4 Flat Washers (38) and 2 Lock Nuts (41).