1.
Open the front panel and
2.
Take off the titanium apatite
photocatalytic air-purifying
Remove the filters from the tabs by remove 6 points
•
of hook.
3.
Clean or replace the
titanium apatite
photocatalytic air-purifying
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
3-2 After washing, shake off remaining
water and let them dry in the shade.
•
Page 30,31
hook (6 point)
[Replacement]
frame and attach a new one.
•
frame when replacing the titanium apatite
•
properly set in the tabs.
Titanium apatite photocatalytic
air-purifying filter
•
4.
Set the titanium apatite
photocatalytic air-purifying
5.
were.
6.
Close the front panel slowly.
NOTE
•
− cannot deodorise the air,
− cannot clean the air,
− results in poor heating or cooling,
− may cause odour.
•
•
the dealer where you bought the air conditioner.
Titanium apatite photocatalytic
Item
Part No.
KAF970A46
Care
hook (6 point)
Page 31
Page 30
32