Advertisement
Quick Links
Architectural Acoustics® ISM
Enclosure Materials & Finish:
Black molded ABS cabinet with matte finish.
Cabinet has UL 94 HB flame retardant plastic for safety, with matching perforated
powder-coated steel speaker grille. Also available in white.
Mounting provisions: One set of two inserts, one on the top center and one on the
bottom center for the supplied speaker bracket. One wall-mount key-hole on the rear
near the top.
Dimensions (H x W x D):
Cabinet Only:
With Mounting Bracket (Approx):
Net Weight:
5.5 Lbs.
(2.5 kg)
Architectural & Engineering Specifications
The loudspeaker system shall have an operating range of 65 Hz to 20 kHz. The
nominal output level shall be 88 dB when measured at a distance of one meter with
an input of one watt when in 8 Ohm Thru mode. The nominal impedance shall be
8 ohms, and the maximum continuous power handling shall be 40 watts, maximum
program power of 80 watts and a peak power input of at least 160 watts, with a
minimum amplifier headroom of 3 dB, in 8 ohm thru mode.
transformer with switched taps at 16W, 8W, 4W and 2W shall be incorporated, with
provisions for 8 ohm Thru mode as well.
woofer with rubber surround shall be used in conjunction with a 1" nominal
diameter polymer dome tweeter, and a frequency dividing network shall divide the
frequencies between them at 7.4 kHz.
The nominal radiation geometry shall be 110 degrees in the horizontal plane and
110 degrees in the vertical plane. The outside dimensions shall be 8.87 inches
high by 5.88 inches wide by 5.57 inches deep. The molded plastic cabinet shall be
made from flame-retardant ABS, meeting UL 94 HB requirements. The weight
shall be 5.5 pounds. The loudspeaker system shall be a Peavey model ISM™5Tx.
2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the warranty statement. Copies of this statement may
be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898,
Meridian, Mississippi 39301-2898.
Copyright 2011 Peavey Electronics Corporation All Rights Reserved
TM
5Tx Loudspeaker
8.87 in. x 5.88 in. x 5.57 in.
225 mm x 149 mm x 141 mm
10.0 in. x 5.88 in. x 8.0 in.
254 mm x 149 mm x 203 mm
A 70.7 V line
A 5" nominal diameter water-resistant
4
™
ISM
5Tx
Installation Loudspeaker
Peavey Electronics Corporation®
®
Advertisement
Related Manuals for Peavey ISM 5Tx
Summary of Contents for Peavey ISM 5Tx
- Page 1 5.88 inches wide by 5.57 inches deep. The molded plastic cabinet shall be made from flame-retardant ABS, meeting UL 94 HB requirements. The weight shall be 5.5 pounds. The loudspeaker system shall be a Peavey model ISM™5Tx. 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement.
- Page 2 Architectural Acoustics® ISM 5Tx Loudspeaker Architectural Acoustics® ISM 5Tx Loudspeaker CAUTION! Product Description When using the 70.7V distribution system transformer inputs, it is typically required that The ISM™5Tx is a small format 2-way speaker system that is perfect for any application an infrasonic filter be used to prevent saturation of the transformer, and possible from foreground music to speech reinforcement.
Need help?
Do you have a question about the ISM 5Tx and is the answer not in the manual?
Questions and answers