Samsung LE22A455 User Manual page 7

5 ANt IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
6 COMMON INtERFACE Slot
- When CI Card isn't inserted in some channels, "Scrambled
Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI Card
ID, Host ID and other information will be displayed in about 2~3
minutes. If an error message is displayed, please contact your
service provider.
- When the channel information configuration has finished, the
message "Updating Completed" is displayed, indicating that
the channel list is now updated.
➣
You must obtain a CI Card from a local cable service provider.
Remove the CI Card by carefully pulling it out with your hands
since dropping the CI Card may cause damage to it.
➣
Insert the CI-Card in the direction marked on it.
➣
The place of the COMMON INTERFACE Slot may be different
depending on its model.
7 headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
8 AV IN [VIDEO]/[R-AUDIO-L]
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio
out connectors on the A/V device.
9 DIGItAL AUDIO OUt (OPtICAL)
- Connect to a Digital Audio Component.
➣
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on
the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.
0 COMPONENt IN
- Connect component video cables (optional) to component connector ("P
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to
the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
- The P , P and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y
R B
and R-Y or Y, Cb and Cr.
-
Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends
to corresponding audio out connectors on the DTV or DVD.
! KENSINGtON LOCK (depending on the model)
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the kensington lock may be different depending on its model.
English - 
", "P ", "Y") on the rear of
R B
", "P ", "Y") on your set.
R B