Electrolux EOC5750AOX User Manual page 17

Description
4 FAULTY TONE
5 DEMO MODE
6 SERVICE MENU
7 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. Press and hold
The display shows SET1 and "1" flashes.
2. Press or
3. Press .
4. Press or
of the setting.
5. Press .
To exit the Settings menu, press
press and hold .
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time
if an oven function operates and you do
not change any settings.
Temperature (°C) Switch-off time
30 - 115
120 - 195
200 - 245
250 - maximum
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off
does not work with the
functions: Light, Slow
Cooking, Duration, End,
Time delay.
for 3 seconds.
to set the setting.
to change the value
or
(h)
12.5
8.5
5.5
1.5
Value to set
ON / OFF
Activation code: 2468
-
YES / NO
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
10.8 Safety thermostat
Incorrect operation of the oven or
defective components can cause
dangerous overheating. To prevent this,
the oven has a safety thermostat which
interrupts the power supply. The oven
turns on again automatically when the
temperature drops.
ENGLISH 17