Table of Contents
Advertisement
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video data
and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
T he TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When
connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack
and the audio cables to the DVI IN (HDMI2) "R-AUDIO-L" jacks on the back of the TV. If this happens,
contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI
version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
DVI IN (HDMI 2) (R-AUDIO-L)
- DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
480i
HDMI/DVI 50Hz
X
HDMI/DVI 60Hz
X
Component
O
4 ANT IN
T o view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 WISELINK
- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)
6 Headphones jack
- H eadphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
7 S-VIDEO o�� VIDEO �� R-AUDIO-L
S-VIDEO o�� VIDEO �� R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- C onnect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre
s ponding audio out connectors on the A/V device.
8 PC IN (PC)��(AUDIO)
- Connect to the video and audio output jack on your PC.
9 SERVICE
- C onnect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV
viewing angle using your remote control.
0 COMPONENT IN 1, 2
- Connect component video cables (optional) to component connector ("P
your set and the other ends to corresponding component video out connectors on the DVD.
- I f you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the
DVD and connect the DVD to component connector ("P
- T he P
, P
and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R
B
R-Y or Y, Cb and Cr.
- C onnect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
- This LCD TV displays its optimum picture resolution in 1080p mode.
- This LCD TV displays its maximum picture resolution in 1080p mode.
! Kensington Lock (depending on the model)
- T he Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
480p
576i
X
X
O
X
O
O
English -
576p
720p
O
O
X
O
O
O
", "P
R
", "P
", "Y") on your set.
R
B
1080i
1080p
O
O
O
O
O
O
", "Y") on the rear of
B
Advertisement
Table of Contents
