Table of Contents
Advertisement
7. Use the Alphanumeric keypad to enter the passkey of the headset you want to
pair with and press the OK key.
8. Your phone will then pair with the headset.
Note: The phone automatically attempts to send a passkey of "0000" to
the device and shows the message "ATTEMPTING TO AUTO PAIR." The
default PIN code is usually 0000. Refer to the Bluetooth accessory's user
guide for additional information.
■ Sounds Settings
To adjust volumes and assign sounds to phone calls and alarms. From Standby
Mode, select
MENU
1.
Call Sounds
— To set ringtones for incoming calls. Select
— To set ringtones for incoming calls. Select
— To set ringtones for incoming calls. Select
to the desired ringtone, and press OK. To set the phone to vibrate when
receiving a call, select
2.
Alert Sounds
— Select the alert type (
— Select the alert type
— Select the alert type (Tone, Vibrate, or Reminder) for an
incoming text message, picture message, or voicemail. Select
incoming text message, picture message, or voicemail. Select
incoming text message, picture message, or voicemail. Select
to set the alert type (Alert, Vibrate, or Off) for emergency dialing.
3.
Keypad Volume
Up and Down (this option only works when the master volume is not set to
Up and Down (this option only works when the master volume is not set to
Up and Down (this option only works when the master volume is not set to
Sounds
Off,
Alarm
Alarm Only
Alarm Only
Alarm
Alarm Only, or
Alarm Only, or
Alarm Only
"Phone at A Glance", p. 10).
"Phone at A Glance", p. 10).
"Phone at A Glance", p. 10).
4.
Service Alerts
•
ERI
— Enhanced roaming indicator (ERI) displays the status of the mobile
— Enhanced roaming indicator (ERI) displays the status of the mobile
— Enhanced roaming indicator (ERI) displays the status of the mobile
service (network service). The status can be "Verizon Network", "Extended
service (network service). The status
service (network service). The status
Network", or "Roaming". See "Banner", p. 58.
•
Minute Beep
•
Call Connect
5.
Power On/Off
(this option only works when the master volume is not set to
Alarm
Only, or
Glance", p. 10).
■ Display Settings
To modify the look and feel of the display. From Standby Mode, select
Settings & Tools
>
>
Settings & Tools
Call Vibrate
Vibrate
Vibrate, or
— To set the volume for the
— To set the volume for the ke
— To set the volume for the keypad, press the Directional key
Only, or
Only, or
, or
Vibrate Only by pressing the Volume keys, see
Vibrate Only
Vibrate Only
Vibrate Only by pressing the Volume keys, see
Vibrate Only
Vibrate Only
Vibrate Only
— To activate an alert.
— To activate an alert.
— To activate an alert.
— To sound an alert every minute while in a call.
— To alert you when a call is connected.
— To enable or disable tones when your phone is turned on or off
Vibrate Only
by pressing the Volume keys, see "Phone at A
Display
Settings.
>
Sounds Settings
. To set the phone to vibrate when
. To set the phone to vibrate when
> On.
.
.
(Tone
Tone,
,
Vibrate
Vibrate, or
, or
, or
Off
Off) for emergency dialing.
Off
Off
Off) for emergency dialing.
Off) for emergency dialing.
) for emergency dialing.
keypad, press the Directional key
ypad, press the Directional key
by pressing the Volume keys, see
by pressing the Volume keys, see
by pressing the Volume keys, see
and from the following:
Call
Ringtone, scroll
Reminder
Reminder
Emergency Tone
All Sounds
MENU
All
Off,
>
57
Advertisement
Table of Contents
