Honeywell HWM845 series Instruction Manual page 3

SETTING UP YOUR HUMIDIFIER
1. Remove packaging materials. Keep this Instruction Manual for reference.
2. Remove twist tie from power cord and extend power cord full length.
3. Ensure Proper Assembly. Make sure Mist Chimney, Essential Oil Cup, and Water
Tray are securely in place and that Heating Element Cover is secured. See
Reassembling instructions after Cleaning your Humidifier section for reference.
4. Place humidifier on a firm, level, water resistant surface a minimum of 12 inches
(30 cm) from walls. Steam should be directed away from any walls, bedding, and furniture.
WARNING : KEEP OUT OF REACH OF CHILDREN. THIS PRODUCT PRODUCES HOT STEAM AND
SHOULD BE PLACED IN AN AREA NOT ACCESSIBLE TO CHILDREN OR PETS, WITH THE POWER CORD
OUT OF REACH.
FILLING / REFILLING
NOTE: Tank should be carried using two hands; one hand on the Tank Handle and the other supporting the
bottom of the Tank.
Manufacturer will not accept responsibility for property damage caused by water spillage.
1 2
1. Remove Tank by grasping Handle and pulling up. Remove Tank Cap by turning counter clockwise (to the left).
2. Fill Water Tank with cool water. DO NOT fill with warm or hot water.
DO NOT ADD ESSENTIAL OILS, MEDICATIONS, OR INHALANT LIQUIDS to the Water Tank. Doing so could
cause damage to the humidifier and void the warranty.
3. Replace Tank Cap by turning clockwise (to right) to screw back in place. DO NOT over-tighten. Place Water
Tank back on humidifier Base.
RESETTING YOUR HUMIDIFIER
When your humidifier is out of water, the Reset Light ( ) will illuminate. To reset:
1. Turn power OFF ( )
2. Refill and replace Tank
3. Wait 5 minutes and turn power ON ( )
NOTE: If Reset Light ( ) is still on, clean the Heating Element
(see Cleaning Instructions section)
4
3
4
USING YOUR HUMIDIFIER
1. Power: With the Power Knob in the OFF position ( ), plug the filled
humidifier into a polarized 120V outlet.
CAUTION
: To avoid electric shock, DO NOT plug in humidifier
with wet hands.
2. Output: Turn Power Knob to high ( ) or low ( ). A green light will indicate the
humidifier is working, but it will take 3-4 minutes for visible steam to appear.
3. Humidity Level: Once a comfortable humidity level has been reached, turn to the
low setting. A comfortable humidity level is between 40-60%.
Consider using a humidity monitor such as Honeywell HHM10 /H10C to display
current room humidity and temperature. If condensation forms on walls, windows, or
around unit, turn humidifier off; the humidity level is too high.
CAUTION: TURN HUMIDIFIER OFF, UNPLUG AND WAIT 20-30 MINUTES FOR UNIT TO COOL BEFORE
MOVING OR CLEANING. DO NOT OPERATE YOUR HUMIDIFIER WITHOUT THE TANK IN PLACE OR IF THE
UNIT IS EMPTY. DO NOT OPERATE YOUR HUMIDIFIER WITHOUT THE MIST CHIMNEY, WATER TRAY,
HEATING ELEMENT COVER, AND ESSENTIAL OIL CUP PROPERLY ASSEMBLED.
NOTE: Consider using a Protec® Cleaning Ball to keep your humidifier cleaner longer.
It will continuously clean and protect against bacteria and mold. It will also help prevent the
buildup of slime in the water and on humidifier surfaces. The Protec Ball will keep your humidifier
cleaner longer between cleanings. However, your humidifier still needs to be cleaned regularly.
USING THE ESSENTIAL OIL CUP
This humidifier features an Essential Oil Cup that can be used with your favorite essential oil or liquid inhalant
for added enjoyment. This is not a diffuser - the oil does not come in contact with water and is passively
evaporated into the air. Essential oil and inhalant sold separately.
1
1. Add a few drops of essential oil or liquid inhalant in the Cup.
WARNING: DO NOT pour any liquids into the Mist Chimney. DO NOT ADD LIQUID INHALANTS,
ESSENTIAL OILS OR ANY ADDITIVES TO THE WATER. DOING SO CAN HAVE ADVERSE EFFECTS ON THE
HUMIDIFIER AND VOID THE WARRANTY.
2. To clean the Essential Oil Cup, ensure the humidifier is off, unplugged, and cooled for at least 20 minutes and
gently wipe residue from the Essential Oil Cup.
2
2
5