Uncle Milton Ever Wonder Star Planetarium Manual

x3
AAA/LR03
Batteries not included.
Night
x3
Light
AAA/LR03
Batteries not included.

Operating Your Planetarium

1. Place planetarium on a table in the center of the room. A room
with smooth, light-colored walls and ceiling works best. A room
that is roughly square and no larger than 12 x 12 feet provides
the best projection quality. Star Theater works best when it is
located two to six feet from the projection surface.
2. Date selector is located on the light wand. To set your
planetarium for the beginning of the audio tour, rotate light

Setting the Date and Time

You can set your planetarium to project the night sky for any date and hour. Here is how:
1. Setting the date: With projection lamp o , turn light wand until the month you want lines
up with the pointer on date selector. Below the month, there are markings indicating the
1st, 10th and 20th of the month. Turn light wand to the left until the date you want lines up
with the pointer. For example, if you want to project the night sky the way it is on July 4th,
rst select July, then turn further to the left, to just past the mark for the rst day of the
month.
2. Setting the time: Once you have selected the month and date, rotate the time ring—
without turning the light wand—so that the time at which the sun sets lines up with the
pointer. (The time at sunset can be found in the local newspaper or on the Internet.) Now turn the light wand to the exact ti me you
want. (Note: The months and dates will change on the date selector as you select the time; once you've selected the date and set the
time ring for sunset, the time selection function takes over.) You can set your planetarium to project the stars for any time of the night.
You can even see what stars are up during the day, when they are not visible.
Download an exciting audio tour of the night sky and our
Stellarium Astronomy Software at UncleMilton.com!
Web Code: STAT1143
Web Code: SPSAS1143
STAR
PLANETARIUM
Battery Cap
Screw
Battery Battery
Module Cap
Night
light
On/O
wand until "AUTUMN" lines up with pointer on the base. (The
month and date settings and the time ring will be used after
the audio tour to set your planetarium for a speci c date and
time of day.)
3. In a darkened room, turn on projection lamp. (Do not look
directly at the Star Sphere while its light is on, or you will lose
your darkness adaptation.)
®
Align
Battery
Module
with
groove
Time Ring
Date
Selector
5107-0250-0417-V01
8+