MSA 81857 Instructions

part no.
81857
instructions
WARNINGS
THESE INSTRUCTIONS MUST BE CAREFULLY READ BY ALL PERSONS WHO HAVE
OR WILL HAVE THE RESPONSIBILITY FOR USING OR SERVICING THE PRODUCT.
If this unit is used with an oil lubricated compressor, high-temperature alarms,
Carbon Monoxide Monitors and additional filtering systems may be required per
29 CFR 1910.134.
Air entering this filter must be CGA Grade D as per Pamphlet
G-7.1 ANSI 286.1-1973.
This Air-Line Filter is used as a final particulate filter and nuisance odor sorbent
for breathing air entering NIOSH - certified Air Line Respirators.
Manufactured by
MINE SAFETY APPLIANCES COMPANY
PITTSBURGH, PENNSYLVANIA, U.S.A., 15230
i 888 iii Rev 2 484816