Using Voice Recognition
Re-starting Voice Recognition
While system waits ▶ Shortly press the
key on the steering wheel. (under 0.8
seconds)
The command wait state will end and the
beep tone will sound. After the "beep", say
the voice command.
5-4
H_LMFC_G3.0[USA_N]AVN Part 5.indd 5-4
H_LMFC_G3.0[USA_N]AVN Part 5.indd 5-4
Ending Voice Recognition
While Voice Recognition is operating
▶ Press and hold the
steering wheel. (over 0.8 seconds)
While using voice recognition, pressing a
steering wheel or a different key will end
voice recognition.
Information
i
•
In a state where the system is waiting for
a voice command, say "cancel" or "exit"
key on the
to end voice recognition.
•
You can also press and hold the
on the steering wheel to end voice recog-
nition.
key
2015-07-22 오후 2:33:0
2015-07-22 오후 2:33:0