Inserting The Batteries In The Remote Control; Connecting To An Aerial Or Cable Television Network - Samsung CS29K30ML Owner's Instructions Manual

Inserting the Batteries in the Remote Control

Connecting to an Aerial or Cable Television Network

Rear of the TV
or
Cable Television
Network
Mono
P 4
English-10
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
( )
2
Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
◆
- on the battery against - on the remote control
◆
+ on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆
"Storing Channels Automatically" on page 15.
◆
"Storing Channels Manually" on page 16.
➢
Signal Strength(
The " "(Signal Strength) symbol is displayed by
pressing the "INFO (
signal strength for your watching TV channel. The more
signal bar is the better TV gets sensitivity on current
channel.
) display (Option)
)" button. This symbol displays