Disconnecting The Stand; Installing The Stand - Samsung BN68-01797A-00 User Manual

Disconnecting the Stand

1. Remove four screws from the back of the TV.
2. Separate the stand from the TV.
Two or more people should carry the TV.
➣
3. Cover the bottom hole with the cover.

Installing the Stand

When installing the stand, use the provided components and parts.
Components
➣
Stand (1 EA)
1. I nsert the Cover Neck into the groove of the stand. Assemble the LCD TV stand by aligning the triangle figures
indicated by the arrow marks.
2. P lace the Guide Stand onto the stand which is assembled in step1 and fasten it using the three
3. C onnect your LCD TV and the stand.
b
4. F asten two
screws at position 1 and then fasten two
Make sure to distinguish between the front and back of each component when assembling them.
➣
Make sure that at least two persons lift and move the LCD TV.
➣
Stand the product up and fasten the screws.
➣
If you fasten the screws with the LCD TV placed down, it may lean to one side.
Cover Neck (1 EA)
Back
Front
English - 4
a
Guide Stand (1 EA)
Front
Back
b
screws at position 2.
b Screws (4 EA)
Screws (3 EA)
Position 2
Position 1
a
screws.