Advertisement

StatClean
USER MANUAL
FEATURES:
Large tank capacity
Stainless Steel Rack and
Basket
Control panel with capacitive
sensing technology
Drainage valve
Memory feature
Two industrial grade
ultrasonic transducers
3-color LED display
Independent control circuit
for each ultrasonic transducer
Multiple circuit protectors
Moisture-proofed PCB with
industrial IC
Two cooling fans
Solid and advanced structural
design
®
- Ultrasonic Cleaner
Tank capacity 6.0 L / 1.6 gallon.
Tank size: 34.0 x 20.5 x 9.9 cm / 13.4" x 8.1" x 3.9"
Use rack when using cassettes and basket for loose
instruments.
Solid panel top. Durable, reliable, resistant to water and harsh
chemicals.
Convenient to use.
Recalls last timer settings.
Uniform distribution of ultrasonic waves, strong cleaning, high
durability.
1 to 30-minute full range timer, degas, and thermometer.
40% higher cleaning efficiency, not susceptible to interference,
more durable.
When overloaded or improperly used, the protectors shut down
the power to certain areas to protect the machine.
Capable for different working environments with better anti-
interference performance.
One for cooling of PCB boards, one for cooling of ultrasonic
transducers. Improve heat dissipation and beneficial for
continuous operations.
4.5 mm thick wall housing made from engineering grade plastic
with tongue-in-groove design for better waterproof and drop-
proof performance.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StatClean SC-P4862 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SciCan StatClean SC-P4862

  • Page 1 StatClean ® - Ultrasonic Cleaner USER MANUAL FEATURES: Large tank capacity Tank capacity 6.0 L / 1.6 gallon. Tank size: 34.0 x 20.5 x 9.9 cm / 13.4” x 8.1” x 3.9” Stainless Steel Rack and Use rack when using cassettes and basket for loose Basket instruments.
  • Page 3 INTRODUCTION Principles of ultrasonic cleaning The cleaning effect is achieved through high frequency vibrations that produce air bubbles within the liquid, which when in contact with an object dislodges the debris. Using tap water is sufficient; however, it is recommended to use filtered water for best results. Read the Manual First Before use of device, review the manual.
  • Page 4: Table Of Contents

    TABLE OF CONTENTS Safety Precautions Product Structure & Accessories Control Panel & Operations Operation Guidelines Memory Operations Common Cleaning Methods Product Exploded View Care and Maintenance Specifications Warranty...
  • Page 5: Safety Precautions

    SAFETY PRECAUTIONS Appliance and cleaner are potential life hazards to children, PLEASE KEEP THEM AWAY AND OUT OF REACH FROM CHILDREN. To prevent life-threatening electrical shock, please observe the following: Danger of electrical shock! Do not use while bathing. Never immerse the device or the power cord in water or any liquids.
  • Page 6 SAFETY PRECAUTIONS To prevent fire hazards, please observe the following: › Do not set unit on soft surfaces (bed, couch etc.) or block the vents on unit. Keep vents free from any obstructions. › Observe the other warnings in the previous section. ›...
  • Page 7: Product Structure & Accessories

    PRODUCT STRUCTURE & ACCESSORIES H. I. Top Cover Control panel Stainless steel tank Handlesa Housing Power switch Drainage pipe fitting Power socket Drainage valve handle Cover holder STANDARD ACCESSORIES: Power cord Hose Stainless steel rack and basket Working time display Multistage thermometer Warning light Degas status...
  • Page 8: Control Panel & Operations

    CONTROL PANEL & OPERATIONS – Working Time Display. It counts down after work is started. 10:00 – Multistage Thermometer. Solid green light indicates: water temperature is 0-30% of 60 ºC/140 ºF. Solid orange light indicates: water temperature is 30-60% of 60 ºC/140 ºF. Solid red light indicates: water temperature is 60-90% of 60 ºC/140 ºF.
  • Page 9: Operation Guidelines

    OPERATION GUIDELINES UNIT SET UP 1. Connect the power cord to the back of the unit and to an outlet. 2. Turn the power switch found on the back of the unit to the On position. 3. LED display shows 10:00. This is the most common timer setting.
  • Page 10 OPERATION GUIDELINES CLEANING 1. Place the lid on the unit. 2. Touch the time button to set the timer to desired time. Refer to your Instrument Cleaning Solution’s Instructions for Use to determine the required cleaning time. OPTIM 28 requires a 5 minute cleaning time.
  • Page 11: Memory Operations

    MEMORY OPERATIONS Equipped with advanced power off memory capability, this unit is able to memorize the latest quick timer. Last timer setting recall. 1. Once the timer hits 00:00, either touch the Start/Stop key within 5 seconds to recall/repeat latest quick timer setting, or wait 5 seconds for the latest timer setting to appear.
  • Page 12: Common Cleaning Methods

    COMMON CLEANING METHODS A. Regular cleaning Use filtered water for best results. You may add an instrument cleaning solution. We recommend OPTIM 28 Instrument Cleaner. Please ensure you follow its instructions for use. Suitable Locations: Dental and medical offices and labs. Cleaning Method: 1.
  • Page 13 COMMON CLEANING METHODS C.Enhanced cleaning. Debris accumulated over a long period of time, heavily soiled. Cleaning Method: 1. Large items can be put in the tank directly, small items need to be placed into baskets beforehand. Do not put items atop each other to prevent rubbing during cleaning.
  • Page 14: Product Exploded View

    PRODUCT EXPLODED VIEW...
  • Page 15 Item Material Top handle Lid-window Lid-top Lid-bottom Top ring Stainless steel basket SUS 304 Stainless steel rack SUS 304 Silicon seal Silicone rubber Stainless steel tank SUS 304 Left cover Left handle Left panel Inner tank Front cover Drain SUS 304 Washer Hose Rubber...
  • Page 16: Care And Maintenance

    CARE AND MAINTENANCE Do not turn on the unit without water in the tank. Although the unit is designed with multiple protections, if the unit is turned on without water for over 15 seconds, it could severly damage the unit and reduce the life of the unit. A thermal switch is attached to the bottom of the cleaning tank.
  • Page 17 CARE AND MAINTENANCE StatClean Audit Procedure - Foil Test Ultrasonic cleaners shall be tested at least weekly for cleaning performance as per the protocol recommended in the manufacturer’s instructions for use. The test results shall be documented. Procedure: 1. Remove the lid, basket, containers and any beakers. 2.
  • Page 18: Specifications

    Contact us first, then send the unit with a copy of the original invoice or receipt back to: SciCan Inc. Manufactured for: 701 Technology Drive SciCan Ltd. Canonsburg, PA 15317 1440 Don Mills Rd. 800-572-1211 • www.scican.com Toronto, Ontario M3B 3P9 Canada 1-800-667-7733 • www.scican.com...

Table of Contents