Subscribe to Our Youtube Channel
Summary of Contents for Simco-Ion FMX-004
- Page 1 FMX-004 User Manual Call the experts on 01952 31 31 42 Email us general@estatsolutions.co.uk...
-
Page 2: Table Of Contents
CONTENTS 1 Introduction ............................. 32 2 Safety .............................. 32 3 Use and operation.......................... 32 4 Technical specifications ........................ 34 5 Putting into use .......................... 35 5.1 Checks .............................. 3 5 5.2 Putting into use ............................ 3 5 5.3 Battery check ............................ 3 6 5.4 Earthing the measuring instrument ...................... 3 6 6 Operation ............................ 37 6.1 Switching on and off .......................... 3 7 6.2 HOLD function ............................ 3 8 6.3 Zeroing ... -
Page 3: 1 Introduction
Performance of Activities by Simco-Ion Europe. 2 Safety The FMX-004 is intended for use in areas that are free of water, oil, solvents and other conductive contaminants. Exposure to such contaminants will cause failure of the electrical insulation system in the product. Formulation of dew on the fieldmeter must be avoided. - Page 4 [M MODE] butt ton. The pl ate can be e kept attac ched to ther end of f FMX-004 4 when not in use. Th he FMX-00 4 is switch hed off auto omatically pproximate...
-
Page 5: 4 Technical Specifications
4 Technical specifications Power supply: 9 V DC alkaline battery, ICE code 6LR61 (30 hours life time) Measuring range: AUTO mode 0 - ±1,49 kV, LO range ±1 - ±30 kV, HI range HI range mode 0 - ±30 kV LO range mode 0 - ±3 kV Hysteresis range... -
Page 6: Checks
If y you have a any problem ms and/or in the cas se of ambig guity: pleas se contact Simco-Ion n or your gional age ent. 2 Putting into use rning: The meas suring ins strument m... -
Page 7: 5.3 Battery Check
Figure 2, battery condition 5.4 Earthing the measuring instrument The case of the FMX-004 is made of a conductive plastic which provides an earth reference for the measuring circuit. To ensure accurate measurement, the person performing the measurement must be in good contact with earth, or the instrument must be earthed using the... -
Page 8: Switching On And Off
Measurin ng unit Battery con ndition 4 Switch Figure 3, displa ay and switches s FMX-004 1 Switchin ng on and witch-on Press the red button n [POWER R] (buzzer a audible for r 1 second,... -
Page 9: Hold Function
2 HOLD fu unction hen measu uring in dif fficult spots s it can be practical t o keep the e measured d values o n screen. B sing the HO OLD-functio on, the mo ost recent m measured value will r remain dis splayed on the screen... -
Page 10: Analog Out
6 Analog o he FMX-00 04 is equip ped with a n analog o out. A cable e with a sta andard mo ono 3,5 mm m mini ackplug can n be conne ected to th e instrume ent. The top p of the plu ug is the si ignal wire,... -
Page 11: Summary
Static ch harge me easurem ents 1 Summar he measuri ing accura acy depend ds on the s size of the a area to be measured d. The FMX X-004 has een calibra ted for 0 – – 30 kV for a flat mea asuring are a of 150 m... -
Page 12: Zeroing
Fit the ad dapter to th he top of th he fieldmet ter (the sid de with the Simco-Ion n logo) unti il it clicks in place. Connect the instrum ment with e earth using g the groun nding lead provided. -
Page 13: Measurement
3 Measure ement rning: or reliable measurem ments the e relative h humidity m must not e exceed 60 To obtain n proper m measurem ents, eart thing of th he measur ing instru ument is es ssential. The buzz zer sounds s continuo... -
Page 14: Faults
Voltage measured at ion Dirt or moisture has Clean the adapter with balance is too low bonded to the adapter ultrasound and dry thoroughly. needed to measure the ion Send the plate to Simco-Ion for balance. repairs if this does not help. -
Page 15: 11 Repair/Calibration
1 Repair/ /Calibrat tion he measuri ing instrum ment has b een calibra ated by Sim mco-Ion. mco-Ion ad dvises you u to have th he measur ring instrum ment calibr rated yearly here are no o spares fo or the mea suring inst trument.
Need help?
Do you have a question about the FMX-004 and is the answer not in the manual?
Questions and answers