ELIKA 460 Quick Setup Manual

QUICK SETUP GUIDE:
IMPORTANT: It is recommended to BENCH TEST this unit by performing the Quick setup procedures below, adding a new user(s) and testing communications. In this manner, if there are any communication
!
concerns experienced after the installation, troubleshooting efforts can be focused towards evironmental variables.
CAREFULLY UNPACK & CHECK THE CONNECTIONS
1
*INSTALLED OPTIONS
APPEAR ON BOX
TOOLS
SECURITY SCREW DRIVER
ROUTE THE POWER AND CONTROL WIRES
2
1. REMOVE THE SECURITY SCREWS
ELIKA 460 MANUALS
INSTALLATION INSTRUCTION MANUAL
WEB APPLICATION MANUAL
UNIT ACTIVATION CARD
2. REMOVE THE MAIN BOARD
37
FOR TECH SUPPORT CALL:
(949) 208-3600
WWW.ELIKAACCESS.COM
MISCELLANEOUS
CALL BUTTON LABELS
FUSE KIT
TRANSFORMER
3. ROUTE THE WIRES
RE-INSTALL THE MAIN BOARD
! IMPORTANT!
STANDARD GOOSENECK
PEDESTAL INSTALLATION
RECOMMENDED.
IF ALTERNATE MOUNTING IS
REQUIRED, ALLOW SPACE FOR
ANTENNA.
WITHOUT PROPER SPACING,
SIGNAL MAY BE INTERRUPTED.
! IMPORTANT!
ELIKA 460 REQUIRES
ACTIVATION BEFORE USE.
SEE THE ACTIVATION CARD
FOLLOW THE PROMPTED
INSTRUCTIONS AT:
www.elikacloud.com
! WARNING
AUTOMATIC GATES CAN CAUSE
SERIOUS INJURY OR DEATH!
THE GATE PATH MUST BE
CLEAR BEFORE OPERATING!
SAFETY DEVICES SHOULD BE
INSTALLED TO ENSURE
PROPER USE.
ELIKA TECHNICAL SUPPORT 1.949.208.3600 ELIKA TECHNICAL SUPPORT 1.949.208.3600