Samsung BN68-01538A-00 User Manual page 7

DVI In(hDmI) [r-auDIo-l]
- DVI audio outputs for external devices.
➣
Supported modes for HDMI/DVI and Component
480i
HDMI/DVI 50Hz X
HDMI/DVI 60Hz X
Component O
4 auDIo out [r-auDIo-l]
- Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends
to corresponding audio in connectors on the Amplifier or DVD Home Theatre.
5 ant In
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
6 SerVICe
- Connector for SERVICE only.
7 KenSIngton loCK (depending on the model)
- The Kensington Lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the Kensington Lock may be different depending on its model.
8 ComPonent In
- Connect component video cables (optional) to component connector ("P
your set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector ("P
- The P , P and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R B
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
480p 576i
X X
O X
O O
english - 
576p 720p
O O
X O
O O
R
", "P ", "Y") on your set.
R B
1080i
O
O
O
", "P ", "Y") on the rear of
B