Auto Wall-Mount (Sold Separately) - Samsung BN68-01415A-00 User Manual

auto Wall-mount (Sold separately)

once the auto wall mount is installed, your tV's position can be easily adjusted.
tV rear Panel
entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
➣
The Auto Wall-Mount screen is displayed.
➣
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the menu butt on to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
enter button.
• Press the ▲ or ▼ button to select "Auto Wall-Mount", then
press the enter
remembering the Position
. Adjust to the desired position using the ▲,▼,◄,► buttons.
➣
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣
Press the InFo button to reset. Press the ◄ or ► button to
select "Yes", then press the enter
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣
To not save the current position, press the return button.
➣
When selecting a save mode, you cannot use the Colour
buttons.
. Press the enter
➣
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
. Press the enter
➣
The saved Position appears on the left side of the OSD.
button.
button.
button to save.
button.
english - 
auto Wall-mount
SerVICe Cable (not supplied)
tV
Plug & Play
language
time
auto Wall-mount
melody
entertainment : off
energy Saving : off
PIP
Position1
Position
adjust
adjust
Setup
: english
: off
move enter return
auto Wall-mount
1 
Save Center
InFo
Save
Select a mode to Save.
Position1
Position
Position
enter return







