Appendix; Powersaver - Samsung SyncMaster 570V TFT Owner's Instructions Manual

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. The available modes are "On", "Standby", "Sleep", and "Deep
Sleep".
PowerSaver operates with a VESA DPMS compliant video card installed in your computer.
You use a software utility installed on your computer to set up this feature. See Table 4
below for details.
Table 4. Power-saving modes
State
Horizontal Sync
Vertical Sync
Video
Power
Indicator
Power
Consumption
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer's mouse or press a key on the
keyboard.
This monitor is EPA E
used with a computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.

Appendix

Normal
Operation
Standby Mode
Active Inactive
Active Active
Active Blanked
Green Amber
25W (Nom.) Less than 3W
®
S compliant and NUTEK/ ENERGY 2000 compliant when
NERGY TAR
English
Power-Saving Function mode
(EPA/ NUTEK / ENERGY 2000)
Sleep Mode
Position A1
Active
Inactive
Blanked
Amber Blinking
(0.5 sec interval)
Less than 3W
19
Deep Sleep Mode
Position A2
Inactive
Inactive
Blanked
Amber Blinking
(1 sec interval)
Less than 3W