Rugged military grade 8u rack mount lcd display, 15” xga transflective lcd 17” or 19” sxga lcd (57 pages)
Summary of Contents for Chassis Plans CPX2-173
Page 1
CPX2-173 Rugged Military Grade 6U Rack Mount 17.3-Inch Wide-Screen LCD Display Technical Reference 22009400A Revision Preliminary X1 April 11, 2014...
Page 2
In no event shall Chassis Plans be liable for any defect in hardware or software or loss or inadequacy of data of any kind, or for any direct, indirect, incidental or consequential damages arising out of or in connection with the performance or use of the product or information provided.
Page 3
This manual is as complete and factual as possible at the time of printing; however, the information in this manual may have been updated since that time. Chassis Plans reserves the right to change the functions, features or specifications of their products at any time, without notice.
Chapter 1 - Introduction Description The CPX2-173 is a military-grade high-performance 6U rack mount or panel mount LCD display offering 1920 x 1080 wide-screen high-definition resolution. The CPX2-173 is designed to meet Mil-Std 901D and MIL-STD- 810G and includes a solid milled aluminum front panel, lightweight 5052-H32 aluminum construction and locking stainless hardware throughout.
In order to not only ruggedize the LCD, but to also enhance the mechanical, optical and EMI properties of the finished unit, as an option, Chassis Plans optically bonds one 3mm anti-reflective or two layers of coated 1.1 mm soda-lime float glass to the front of the LCD panel. The first layer is coated with an Indium Tin Oxide (ITO) coating with a surface resistivity of <13.5 ohms/sq.
Chassis Plans CPX2-173 Technical Reference Chapter 1 - Introduction Without Optical Bonding With Optical Bonding Or AR Coating And AR Coating Reflected Reflected Light Light 0.3% 4.5% Total Total 0.1% 0.7% 4.5% 22.5% 4.5% 0.1% 0.1% 4.5% 4.5% 0.1% Figure 3 – Comparison of Reflections with and without Optical Bonding The resulting structure in conjunction with the CPX2-1732 Hi-Bright 1000nit panel has greatly enhanced optical characteristics in high ambient light conditions.
Chassis Plans CPX2-173 Technical Reference Chapter 1 - Introduction Genesis Based LCD Controllers The LCD Controller is a key component in any display system and no expense has been spared in specifying the Standard Controller and Advanced HD-SDI Controller Genesis controllers. These are long life revision controlled military grade components.
Chassis Plans CPX2-173 Technical Reference Chapter 1 - Introduction Specifications Enclosure Environmental 6U (10.47”) x 3.2” deep (Designed to meet or exceed) Front Panel milled 5052 aluminum alloy Body made of 5052-H32 aluminum alloy Altitude All stainless steel hardware 10,000 ft. Operational, All self-locking pressed in fasteners where 30,000 ft.
Chassis Plans CPX2-173 Technical Reference Chapter 2 – Power Supply Options Chapter 2 – Power Supply Options AC Input Power Supply The AC Input Power Supply is a 65W Medical Grade “Brick” style power supply. The output is provided with a circular mil connector for connecting to the LCD Keyboard Drawer.
Chapter 2 – Power Supply Options 12VDC Input Transient Filter The CPX2-173 display consoles require nominal +12VDC at 40W for operation. An EMI line filter is provided to limit EMI emissions and to provide a small measure of input filtering.
Chassis Plans CPX2-173 Technical Reference Chapter 2 – Power Supply Options MIL-STD-704/1275 28VDC DC Input The ‘C’ option 28VDC Mil-Std-704/1275 DC Input is an internal power supply providing true 704/1275 input specifications allowing reliable operation from nominal 28VDC input mains in a military environment. This supply meets Mil-Std-704A and Mil-Std-1275A (100V for 50mS).
Chassis Plans CPX2-173 Technical Reference Chapter 2 – Power Supply Options +/-48VDC Power Supply The xx 48VDC Input Converter provides universal isolated 48VDC input, either positive or negative input. Thus it can be used in a data center with centralized power of +48VDC as well as a central office with -48VDC mains.
A – AC input, universal 100-260VAC, 50/60Hz B – 12VDC Front End Transient Filter C – 28VDC Mil-Std-704 Military Grade D – 12VDC for connection to Chassis Plans Chassis Power Plug E – +/-48VDC, Vicor Module Military Grade F – AC input, universal 100-260VAC, 400Hz Example Part Numbers CPX2-1731BD4A –...
Page 20
Chassis Plans CPX2-173 Technical Reference Chapter 3 – Ordering Information This Page Intentionally Blank Page 14...
For the DC input supplies, a kit is provided with a mating Mil Circular connector, backshell, and pins allowing the user to fabricate an appropriate cable for the intended application. For volume orders, Chassis Plans can provide pre-fabricated power cables per the end use specifications. Page 15...
Rack Installation To mount the CPX2-173 in a rack, it is first important you identify the correct holes to mount to. Please see the following illustration. Note that a ‘U’ starts between the holes that are ½” apart. One very common problem is trying to install into the wrong holes.
Chassis Plans CPX2-173 Technical Reference Chapter 4 - Installation Connecting the Display The CPX2-173 provide for two controllers with rear panel details provided below. Standard Controller Rear Panel Connections The Standard Controller provides for DVI and VGA inputs. In addition, the rear of the display provides for Keyboard and Pointing Device outputs plus a Circular Mil connector for power connection.
Chassis Plans CPX2-173 Technical Reference Chapter 4 - Installation Advanced Controller Rear Panel Connections The Advanced Controller provides for HD/SDI, VGA analog, HDMI, Display PortComposite and S-Video video inputs. The Advanced Controller also supports Picture-In-Picture (PIP) allowing a video input (Composite or S-Video) image to be laid on top of either a VGA or DVI input.
Chassis Plans CPX2-173 Technical Reference Chapter 5 – Operation & OSDs Chapter 5 - Operation LCD Front Panel Controls The On Screen Display (OSD) is adjusted as follows: 1. Press the Menu Button located on the front of the monitor.
The RS-232 program can be custom-tailored to fit the application or it can be used as provided by Chassis Plans on request. Please contact Chassis Plans for additional information. Note: Not all Serial Control functions are supported in the Advanced HD/SDI controller. In the following table, functions not supported for the Advanced HD/SDI Controller are indicated with a ‘*’...
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Table 11 - Standard Controller Parameter Setting - Immediate, Relative, Reset and Query Function Command Description Acknowledge (if enabled) Volume control - 0x80, “a” | “A”, Set audio (L+R) volume =...
Page 35
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Image V position 0x87, Set img_vpos = Image vertical position. nnnn | “+” | “-” | value/increment/decrement (In PC mode only) “?” Query Sharpness 0x8a, Set sharpness = Sharpness.
Page 36
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Auto Source Seek* 0x99, Set Auto source enable = *1 “nn” = Source “0x41,0x31”- ARGB nn , Disable/ Enable “0x42,0x31”- Composite “0” | Query “0x42,0x32”- Composite 2 “1” | Valid Source query “0x43,0x31”- S-video “0x43,0x32”-...
Page 37
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Hotkey 2* 0xa0, “2”, Set Hotkey 2 = “1” – volume. value “2” – brightness. “r” | “R” | Reset “3” – contrast. “?” Query “4” – colour.
Page 38
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Zoom H position* 0xa9, Set Zoom_hpos = Zoom window horizontal nnnn | “+” | “-” | value/increment/decrement position. “r” | “R” | Reset “?” Query Default : 0x30 0x30 0x30 0x30...
Page 39
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Red level for 0xb4, Set the level of the red channel Red level for selected colour selected colour for the selected colour temp. = temperature. temperature nn | “+” | “-” | value/increment/decrement “r”...
Page 40
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming OSD turn off* 0xbd Turn off the OSD. “0” – fail. “1” – successful. Set gamma data 0xbf, mm, c, “?” Query gamma data for color c “nn” = gamma data...
Page 41
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Backlight PWM 0xe6, Set Backlight PWM Frequency = +/- 20Hz Frequency* nnn | “+” | “-” | value/increment/decrement Value “R” | “r” | Reset 100Hz : “0”,”6”,”4” “?”...
Page 42
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming PIP Window Auto “0xee”, “0x41” Auto Off / Auto On “0”- Off Off* “0” |”1” “1”- On “?” Query ScreenMarker* “0”- Off “0xee”, “0x42” Screen Marker Off / Screen “1”- On...
Page 43
Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming Function Command Description Acknowledge (if enabled) Send Display 0xF1, “S” – Send Command Mark* ”S” | “S” = “0x53 or 0x73” “Text” – Character e.g Send ”0x21” | ”0x40”...
Chassis Plans CPX2-173 Technical Reference Appendix B – Auto Color Gain Appendix B – Auto Color Gain The Auto Color Gain function is supported in the ARGB mode only and is designed to calibrate the controller to the incoming video signal. In order to calibrate correctly, the display must be displaying an image containing both black and white data (see illustration below) when the function is used.
Chassis Plans CPX2-173 Technical Reference Appendix C – DVI-D versus DVI-I Appendix C – DVI-D versus DVI-I Connectors The Digital Visual Interface (DVI) is a video interface standard designed to provide very high visual quality on digital display devices such as flat panel LCD computer displays and digital projectors. It was developed by an industry consortium, the Digital Display Working Group (DDWG).
Windows based serial communications software to send and receive data across a TCP/IP network. Please note this is a 3rd party program and is not warranted nor is it the responsibility of Chassis Plans. Browser based web server mode : For experienced users the following quick guide to trying out the network connection and functions may be useful.
The IP Locator is a tool to search for any available CPX2-173 connected to the local network within same subnet. If you don’t know the IP address of your CPX2-173, the IP Locator program can help you to find the IP address allocated to your CPX2-173.
Connect the CPX2-173 to a router using Cat-5 cable. It is suggested to use “DMZ” function on the router. The standard ports required by the CPX2-173 is shown as below: Table D-1 – Remote Control To setup DMZ function on your router, you may refer to the following procedure for your reference. (Different routers will has its different setup methods;...
Connect to multiple CPX2-173 If more than one CPX2-173 are installed at the same location but only has a single IP address to internet, then a router with the NAT, Port forward and firewall function to map different service ports to individual CPX2- 173displays is required.
Chassis Plans CPX2-173 Technical Reference Appendix D – Ethernet Network Connection Step 2: Locate the internal IP addresses of all CPX2-173. (e.g. 192.168.1.2 and 192.168.1.3) Image D-6 – DHCP Table Screenshot Step 3: Set all ports forwarding under NAT function of router. (see the screen below for example.) Image D-7 –...
Page 54
Chassis Plans CPX2-173 Technical Reference Appendix D – Ethernet Network Connection This Page Intentionally Blank Page 48...