Advertisement
EM-200 / 300 / 500 / 600 Needle Wheel
Installation Guide
Please open the package carefully and check for damaged or lost parts.
PARTS INCLUDED:
•
Main skimmer body
•
Collection cup and lid
•
Air silencer
•
Air hose
•
Quick-precise adjusting valve
•
Needle wheel pump
•
Rubber Feet
Assembling the main unit
1. Connect rubber feet to the main base.
2. Connect the air hose from the air intake to the silencer.
3. Install the cup into the neck of the skimmer. A 1/8
(DO NOT OVER TIGHTEN SKIMMER CUP AS DAMAGE MAY RESULT)
4. To speed up the break in process, it is recommended to use warm water to clean the skimmer
before installation. (DO NOT USE ANY SOAP OR CHEMICALS TO CLEAN THE SKIMMER)
Protein Skimmer
www.aquamaxxaquariums.com
th
clockwise turn will keep the cup in position.
Advertisement
Table of Contents
Related Manuals for AQUAMAXX EM-200
Summary of Contents for AQUAMAXX EM-200
- Page 1 EM-200 / 300 / 500 / 600 Needle Wheel Protein Skimmer Installation Guide Please open the package carefully and check for damaged or lost parts. PARTS INCLUDED: • Main skimmer body • Collection cup and lid • Air silencer •...
- Page 2 Select a suitable place to set your protein skimmer 1. For best results place the skimmer in 8 to 10 inches of water. Please make sure that the skimmer is in no more than 10 inches of water. Otherwise, the Quick- precise adjusting valve will not function properly.
- Page 3 To Start 1. Plug in the pump. 2. The main chamber will fill with bubbles. Carefully adjust the Quick-precise adjusting valve (clockwise to close, the water level in the chamber will go up; counter-clockwise to open, the water level will go down). Adjust the water level within the skimmer to where the cup meets the neck.
Need help?
Do you have a question about the EM-200 and is the answer not in the manual?
Questions and answers