EdgeStar DWP62BL Owner's Manual page 26

Troubleshooting Continued
Issue
Black or gray marks
on dishes
Detergent left in
dispenser cup
Dishes are not
cleaned
Cloudiness on
glassware
The dishes are not dry
Possible Cause
Utensils may have
rubbed against
dishes
Dishes are blocking
detergent cups
Dishes were not
loaded properly
The wash cycle
was not powerful
enough
Not enough
detergent was
dispensed
Items are blocking
the path of the
spray arms
The filter
combination in the
base of the
dishwasher is not
clean or is installed
incorrectly
Combination of too
much detergent
with soft water
The filter may be
dusty or blocked
Improper Loading
Not enough rinse
aid
Dishes are
removed too soon
Wrong cycle
selected
Cutlery has a low-
quality coating
Solution
Use a mild abrasive cleaner to
eliminate marks. Load carefully.
Re-load dishwasher according to
instructions in this manual.
See notes on loading the dishwasher.
Select a more intensive wash cycle.
Use more or change brand of
detergent.
Rearrange the items so the spray arms
can fully rotate.
Clean and install the filter combination
correctly.
Use less detergent and/or select the
shortest wash cycle to clean
glassware.
Clean the filter and replace it if needed.
Re-load dishwasher according to
instructions.
Refill and/or increase the amount of
rinse aid.
Do not remove dishes from dishwasher
immediately.
Short cycles have lower cleaning
performance. Choose a more intensive
cycle.
Dishwasher is not suitable for low-
quality coating.
22